|
|
Post by woodbine66 on Feb 8, 2016 18:30:41 GMT
Got a couple of questions re, a Turbomax refusing to produce hot water. It's the newer model with white fascia panel and dials and LCD display. I'm thinking it's likely to be the aqua sensor, but not sure how to test. There's 3 wires, and I'm assuming that the sensor is just a switch that makes when a hot tap is opened. Which of the 2 of the three wires should give continuity when there hw demand?
Any other advice on the problem and tips for using the boiler's own diagnostics would be much appreciated. |
|
|
|
Post by tomplum on Feb 8, 2016 20:00:48 GMT
I'm not familiar with that boiler Woodie have you got a link for it?
|
|
|
|
Post by woodbine66 on Feb 8, 2016 20:43:06 GMT
|
|
|
|
Post by tomplum on Feb 8, 2016 22:10:56 GMT
I'll have a look at it tomorrow Woddy, but without being in front of the boiler I can't get a good feel of what's happening, i can only give a guess and it might be a bad guess, i would't want to say its a part and you buy that part only to find out its a bad guess,
smiley-whacky086 fan shit
|
|
|
|
Post by woodbine66 on Feb 9, 2016 17:01:49 GMT
OK, Tom. No problem. Know what you're saying - don't want to just throw parts at it. Thanks
|
|
