Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 25, 2018 20:35:10 GMT
Well, after extensive field trials I can confirm the adjustable ratchet wrench is worse than fucking useless!!.......What a pile of shite! Ian, I get 45 minutes to fit a radiator not 45 fucking hours!!! Us real Plumbers work fast as fuck & bonus or price Work is the order of the day. I need to fit a boiler & 9 radiators in one shift to make my £2K a week, it’s got to be neat & no leaks. That spanner is deffo not designed for speed & is a complete disaster on anything to do with Plumbing. To get it to ratchet, the nut cant be loose & with anything I used it on I needed to click the ratchet every time. So, I chucked it in the back of the Garage....along with the QVC tools Olive bought me & were likewise fucking useless. So in conclusion Ian, stick to spreading shit on the walls & leave a skilled Trade to the Artisans, there’s a good fellow👍👍 I thought they'd be shite Dick and you confirmed my suspicions. smiley-chores037 binsout |
|
|
|
Post by dickpuller on Apr 25, 2018 21:05:09 GMT
Well, after extensive field trials I can confirm the adjustable ratchet wrench is worse than fucking useless!!.......What a pile of shite! Ian, I get 45 minutes to fit a radiator not 45 fucking hours!!! Us real Plumbers work fast as fuck & bonus or price Work is the order of the day. I need to fit a boiler & 9 radiators in one shift to make my £2K a week, it’s got to be neat & no leaks. That spanner is deffo not designed for speed & is a complete disaster on anything to do with Plumbing. To get it to ratchet, the nut cant be loose & with anything I used it on I needed to click the ratchet every time. So, I chucked it in the back of the Garage....along with the QVC tools Olive bought me & were likewise fucking useless. So in conclusion Ian, stick to spreading shit on the walls & leave a skilled Trade to the Artisans, there’s a good fellow👍👍 Well Dick, why you would want to use a spanner on a nut that was loose is beyond me. Perhaps us plasterers are less limp wristed than you plumbers because I use my fingers to start a nut or finish undoing it and the fatmax spanner handles the rest without issue and faster than a normal adjustable and without marring the fitting like grips. Another one that cant work a spanner  Top tip - it`s not the spanner in your hand that causes leaks and crap work. It`s the spanner holding it.. Of course you fit a spanner on a loose nut, that’s because it needs to be tightened mate........FFS, stick to the manky Plastering Work fella, you know fuck all!! Messy cunts cover everything in Plaster, it’s not a trade - you’re just a poofed up Labourer. My Plumber Work I top notch, I don’t need to fuck around doing anything else & pretend I’m wonderful. You’re a chancer & prize tozzer!! |
|
|
|
Post by dickpuller on Apr 25, 2018 21:10:21 GMT
Well, after extensive field trials I can confirm the adjustable ratchet wrench is worse than fucking useless!!.......What a pile of shite! Ian, I get 45 minutes to fit a radiator not 45 fucking hours!!! Us real Plumbers work fast as fuck & bonus or price Work is the order of the day. I need to fit a boiler & 9 radiators in one shift to make my £2K a week, it’s got to be neat & no leaks. That spanner is deffo not designed for speed & is a complete disaster on anything to do with Plumbing. To get it to ratchet, the nut cant be loose & with anything I used it on I needed to click the ratchet every time. So, I chucked it in the back of the Garage....along with the QVC tools Olive bought me & were likewise fucking useless. So in conclusion Ian, stick to spreading shit on the walls & leave a skilled Trade to the Artisans, there’s a good fellow👍👍 I thought they'd be shite Dick and you confirmed my suspicions.  Mate, it’s fucking useless, it’s like something you’d see in Dragon’s Den & think, fuck that’ll not work, I’m out. I thought Ian the tosspot had some credibility, that’s why I bought one. But he’s clearly a moron with learning difficulties. |
|
ian
chief spread 
Posts: 294
|
Post by ian on Apr 25, 2018 21:23:34 GMT
Well Dick, why you would want to use a spanner on a nut that was loose is beyond me. Perhaps us plasterers are less limp wristed than you plumbers because I use my fingers to start a nut or finish undoing it and the fatmax spanner handles the rest without issue and faster than a normal adjustable and without marring the fitting like grips. Another one that cant work a spanner Top tip - it`s not the spanner in your hand that causes leaks and crap work. It`s the spanner holding it.. Of course you fit a spanner on a loose nut, that’s because it needs to be tightened mate........FFS, stick to the manky Plastering Work fella, you know fuck all!! Messy cunts cover everything in Plaster, it’s not a trade - you’re just a poofed up Labourer. My Plumber Work I top notch, I do’t need to fuck around doing anything else & pretend I’m wonderful. You’re a chancer & prize tozzer!! Dick, you can`t even cut a piece of waste pipe straight and can`t use a spanner, not a good start for a plumber. Esp when a "poofed up labourer" doesn`t struggle with these most basic of tasks. This spanner, that is so useless, is no different to a normal adjustable other than the ratchet. So, if you have wanked away your energy overnight and cant achieve tightening a nut finger tight due to the repetitive strain injury then do what you would normally do with any other spanner and take it off the fitting and start a new turn. Not rocket science is it? |
|
|
|
Post by dickpuller on Apr 25, 2018 21:40:30 GMT
Really??!!! So you need to hand tighten a nut, adjust the dafty’s ‘tight nut’ spanner & then move it on every turn, mate it’s completely useless. If you can’t tighten a loose nut, which it can’t, it’s shite!
I share my honest experiences & make more money in my trade then you. You’re just a chancer & a Billy Big Balls.
You clearly can’t take honest criticism & you’re likely to be as rough as fuck as a Plasterer, that’s why you need to ‘try’ a proper Trade.
That spanner is officially shit & I’d not recommend it to anyone, a complete waste of money.
|
|
ian
chief spread
Posts: 294
|
Post by ian on Apr 25, 2018 22:04:36 GMT
Really??!!! So you need to hand tighten a nut, adjust the dafty’s ‘tight nut’ spanner & then move it on every turn, mate it’s completely useless. If you can’t tighten a loose nut, which it can’t, it’s shite! I share my honest experiences & make more money in my trade then you. You’re just a chancer & a Billy Big Balls. You clearly can’t take honest criticism & you’re likely to be as rough as fuck as a Plasterer, that’s why you need to ‘try’ a proper Trade. That spanner is officially shit & I’d not recommend it to anyone, a complete waste of money. Hand tightening is faster until it gets tight and no you don't have to adjust anything. You take the spanner off the fitting, like you would your normal adjustable, spanner or grips and start a new turn which you will only have to do once (if at all) as by then the nut is tight enough to us the ratchet. You can share your honest opinions all you want but the fact is that today, and most days, i use this spanner as quick as you would use a ratchet. I would recommend it to anyone (with more than half a brain) As for being a billy big balls, you are the one stating the fucking obvious in your masterclass on ufh like you are some sort of guru when you can`t even calculate your wattage requirements accurately. As for plumbing being a "proper trade", that's pish. Its a big meccano set which any man with an ounce of common sense could put together. |
|
|
|
Post by arfur chrysaik on Apr 25, 2018 22:05:01 GMT
Really??!!! So you need to hand tighten a nut, adjust the dafty’s ‘tight nut’ spanner & then move it on every turn, mate it’s completely useless. If you can’t tighten a loose nut, which it can’t, it’s shite! I share my honest experiences & make more money in my trade then you. You’re just a chancer & a Billy Big Balls. You clearly can’t take honest criticism & you’re likely to be as rough as fuck as a Plasterer, that’s why you need to ‘try’ a proper Trade. That spanner is officially shit & I’d not recommend it to anyone, a complete waste of money. |
|
ian
chief spread
Posts: 294
|
Post by ian on Apr 25, 2018 22:20:46 GMT
Really??!!! So you need to hand tighten a nut, adjust the dafty’s ‘tight nut’ spanner & then move it on every turn, mate it’s completely useless. If you can’t tighten a loose nut, which it can’t, it’s shite! I share my honest experiences & make more money in my trade then you. You’re just a chancer & a Billy Big Balls. You clearly can’t take honest criticism & you’re likely to be as rough as fuck as a Plasterer, that’s why you need to ‘try’ a proper Trade. That spanner is officially shit & I’d not recommend it to anyone, a complete waste of money. Undone any radvalves with your socket set lately arfur? laughing-dog-smiley-emoticon |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 25, 2018 22:29:09 GMT
Are you related or a work colleague of the great Bearwood Brown Ian ? I mean surely there can't be two such great tradesmen on this small island
|
|
|
|
Post by arfur chrysaik on Apr 25, 2018 22:40:36 GMT
Undone any radvalves with your socket set lately arfur?  Ian son , Your'e that fuckin thick you cant even see it when the pish is getting ripped from you. isn't it time for your bedtime storybook, what is it tonight, Albert Einstein's theory of special relativity, or a book on "How to build a rabbit hutch". |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 25, 2018 22:46:14 GMT
I looked up the reviews on this super adjustable spanner smiley-laughing021 it makes good reading laughing-dog-smiley-emoticon smiley-chores037 binsout
|
|
ian
chief spread
Posts: 294
|
Post by ian on Apr 25, 2018 23:10:16 GMT
Are you related or a work colleague of the great Bearwood Brown Ian ? I mean surely there can't be two such great tradesmen on this small island There are thousands of great tradesman on this small island, craftsmen too. Just because you don't have the aptitude to learn more than one trade there is no need to be jealous of those that do. |
|
ian
chief spread
Posts: 294
|
Post by ian on Apr 25, 2018 23:20:29 GMT
Undone any radvalves with your socket set lately arfur? Ian son , Your'e that fuckin thick you cant even see it when the pish is getting ripped from you. isn't it time for your bedtime storybook, what is it tonight, Albert Einstein's theory of special relativity, or a book on "How to build a rabbit hutch". Arfur, your too thick to realise that your "pish" taking is that weak and pathetic that I simply do not care. I am hardly going to take someone that cant cut a pipe straight seriously. Or their crowd of arselicking circle jerkers. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 26, 2018 6:48:39 GMT
Are you related or a work colleague of the great Bearwood Brown Ian ? I mean surely there can't be two such great tradesmen on this small island There are thousands of great tradesman on this small island, craftsmen too. Just because you don't have the aptitude to learn more than one trade there is no need to be jealous of those that do. Who says I can't do over trades Ian ? Just because I don't beat my drums on here like yourself and those that shout about it are very often useless I always offer people helpful advice when I can and you'll never see me on here telling people how great I am. No one likes big-heads and chancers. |
|
|
|
Post by endfeed on Apr 26, 2018 17:09:55 GMT
In my experience, plumbers can turn there hand to most trades!!!!I've noticed on site plumbers are always there to offer help when needed to others. We seem to get shit for our team player ways!"the fucking plumber"what's that all about!!!!
|
|
